On-One Scandal 29er Swap-Out Frame V2
On-One Scandal 29er V2 Vertical Dropout Frame
Our award winning Scandal is back in a new updated incarnation bringing even more to the big wheeled genre than before.
Starting at the front, a new tapered head tube means big fork compatibility. Using our Smoothie Mixer taper headset standard, the Scandal 29 can take taper or straight steerer forks, and is even compatible with our new "slackset" to kick the head angle out for more all-mountain playful handling.
A curved seat tube gives better rear wheel clearance and takes a 31.6mm post, so is "dropper" compatible. Clamp size is 34.9mm.
Gear routing runs on top tube in a full gear outer , so a top pull 34.9mm front mech is required.
BB shell is 73mm English threaded.
Out back, the frame gets the swapout treatment and is fitted as standard with our Type b2 vertical dropout for disc brake compatibility.
Frame tubing is a mix of 7046 high strength thin wall multi butted alloy main tubes and 7005 butted and shaped rear stays. Chainstays are bridge less with reinforcing gussets for increased fatigue strength and clearance.
Seatstays are classic on one wishbone style.
One Bottle Cage Mount Point on the downtube. Seat tube one may be obstructed by a high mount front mech. Low mount mechs are possible only with a 42t or larger outer chainring. Sorry.
Likewise, brake hose routing should follow the top tube and seat tube guides due to possibility of interference with gear cabling on downtube.
Geometry is identical to classic Scandal and Inbred 29 geometry. 444mm rear stays with 72deg head angle on all but the 16in model which features a 71deg angle.
Frame weight is slightly more than previous models, but still certainly well under 4lb, which is best in class at this pricepoint.
Frame finish is either :-
"Super raw". Rough brushed then anodised, with lazer graphics. This finish is factory raw so each frame is unique.
Ano black. Blast finish with black anodise then lazer graphics.
Taiwan Racing Green paint with white outline graphics.
Scandal has our standard 2yr manufacturing defect warranty.
Frame Details
| Frame Material | Aluminium 7046 Alloy |
| Approx. Frame Weight (g) | TBC |
| Seatpost Size (mm) | 31,6 |
| Seat Clamp Size (mm) | 34,9 |
| Front Mech Clamp Size (mm) | 34,9 |
| Wheels | 29" x 2.4 tyres will just about fit, but we recommend 2.0 – 2.3" for best performance |
| Mudguard mounts | No |
| Rack Mounts | No |
| Bottle Cage Bosses | 1 set |
| Fork Travel | 100mm MAX |
| Dropouts | Horizontal |
| Bottom Bracket shell | 73mm, English threaded |
| 16" | 18" | 19.5" | 21" | ||
|---|---|---|---|---|---|
| A | Head Angle (°) | 71 | 72 | 72 | 72 |
| B | Head Tube Length (mm) | 105 | 105 | 105 | 105 |
| C | Effective Top Tube (in) | 23 | 23.7 | 24.4 | 25.2 |
| D | Seat Angle (°) | 73 | 73 | 73 | 73 |
| E |
Seat Tube Length Centre to Top (mm) |
406.4 | 457.2 | 495.3 | 533.4 |
| F | Chainstay Length (mm) | 444 | 444 | 444 | 444 |
| G | ΒΒ drop (mm) | 58 | 58 | 58 | 58 |
ride geomtry at ride height with 80mm fork sagged to 470mm length
Sizing Guide
| Rider Height | Inside Leg | Suggested Frame Size | Stem Length |
|---|---|---|---|
| 5′6″ to 5′10″ | 28”-31” | 16” | 40-60mm |
| 5′9″ to 6′1″ | 30”-34” | 18” | 40-60mm |
| 5′10" to 6′2″ | 32”-35” | 19.5” | 40-60mm |
| 6′ to 6′5″ | 33”-38” | 21” | 40-80mm |
Sizing Notes
All frame size recommendations are approximate. A good fit will also depend on the correct choice of stem length, correct bike set-up for the rider and riding style.
Correct frame size choice can also depend on a rider’s torso and limb length.
